Heavy Duty Digital Taper Gauge 0.2-10mm Slot Gauge

Note: Hold the caliper horizontally when unscrew it, in case the beam drops on the ground and damage it. 

  The Heavy duty type digital taper gauge is widely used in power station to measure the gap or slot width of turbomachine and other machine. It is also referes to as digital taper slot gauge.  More Thicker, more stronger. 

Features: 

- Heavy duty type, more thicker than 70801 types gauge. 

- Highly precision ground surface

- Handened Stainless steel 

- Packed in wooden box 

Specification: 

0.001° Dual Axis Digital Inclinometer High Precision 

     The difference between INCL-820 is double axis with two rows display on X and Y axis.  With 0.001 degree resolution, the instruments are more sentitive. It is designed for inspector who need monitoring angle control by real time. it is widely used in Aerial Work Platforms industry. Tilt Sensor, Tilt Meter

-Who need inclinometer: 

-  Cell phone base constructer

-  Building constructer.

-  Road slope

-  Medical Instruments. 

-  Aircraft manufacturer

-  Platform Leveling

-  Pitch and Roll Monitoring

-  Antenna Positioning

-  Vehicle Tilt Monitoring

 
Features:

   -Max accuracy: <0.003°        

   -Repeatability: 0.003°  

   -Angle resolution: 0.001° 

   -Maximum measuring range: 90°

   -With changeable alarm

   -Data storeage

   -Absolute/Relative measurement can switch   

   -Both sides and bottom can measure

   -Double benchmark strong magnet installation

   -Working Temperature : -10°～ 70℃ 

   -Auto-angle interleaved compensation function  

   -Auto temperature drift compensation 

   -Zero at any position. 

   -Built-in rechargable industry batteries

   -Night vision fours colors screen  

   -IP54 protection class

   -°/mm/m Dual units switch function

   -Filter frequency optional

   -Three kinds of measurement mode selectable (radian, angle, mm) 

   -Metal shell

   -With Software 

   -With hold function

-Specification:      

Stainless Steel  Machinist Square 100*70mm Engineering Square with Base

Features:

With a wide base giving stable support for free standing applications

Quality stainless steel square

Standard:DIN875

Grade 0

Specification: 

DIN 875 Engineering Square with Base 50*40mm Machinist Square

Features:

With a wide base giving stable support for free standing applications

Quality stainless steel square

Standard:DIN875

Grade 0

Specification: 

1000-2000mm Tubular Inside Micrometer With Extension Rods

Features: 

• Accuracy: (7 n L/50)?m. n=number of rods, L=maximum measuring length(mm)
• Resolution: 0.01mm
• Carbide measuring faces
• Supplied with setting standards
• Travel of micrometer head: 50mm

Specification: 

1000-4000mm Tubular Inside Micrometer With Extension Rods

Features: 

• Accuracy: (7 n L/50)?m. n=number of rods, L=maximum measuring length(mm)
• Resolution: 0.01mm
• Carbide measuring faces
• Supplied with setting standards
• Travel of micrometer head: 50mm

Specification: 

1000-3000mm Tubular Inside Micrometer With Extension Rods

Features: 

• Accuracy: (7 n L/50)?m. n=number of rods, L=maximum measuring length(mm)
• Resolution: 0.01mm
• Carbide measuring faces
• Supplied with setting standards
• Travel of micrometer head: 50mm

Specification: 

1000-2000mm Tubular Inside Micrometer With Extension Rods

Features: 

• Accuracy: (7 n L/50)?m. n=number of rods, L=maximum measuring length(mm)
• Resolution: 0.01mm
• Carbide measuring faces
• Supplied with setting standards
• Travel of micrometer head: 50mm

Specification: 

150-4000mm Tubular Inside Micrometer Extension Rods and Standard

Features: 

-Wide range of ID measurements by combining extension rods (pipes) and anvils with the micrometer head

-Lightweight tubular steel construction 
-Chrome frame 
-Laser engraved graduations Metric 
-Resolution: 
-0.01mm/Metric

-Packed with wooden box with foam for long time shipping by sea or by air. 

-The contact can be flat or spheric depends on customers request. 

-OEM is welcomed for this type. ROK International can turn your thinking into drawing and real micrometer. 

-Inside micrometer Range: 100-1200mm, 100-1400mm, 150-3000mm, 150-4000mm, 150-5000mm, 150-6000mm

-Low Cost, Affordable

Specification: 

Note: We reserve the right to change products and specifications at any time without notice. Images may or may not include optional equipment. Subject to ROK final confirmation

150-3000mm Tubular Inside Micrometer Pipe Type

Specification: 

Note: We reserve the right to change products and specifications at any time without notice. Images may or may not include optional equipment. Subject to ROK final confirmation

100-1400mm Tubular Inside Micrometer with Extension

Features: 

-Wide range of ID measurements by combining extension rods (pipes) and anvils with the micrometer head

-Lightweight tubular steel construction 
-Chrome frame 
-Laser engraved graduations Metric 
-Resolution: 
-0.01mm/Metric

-Packed with wooden box with foam for long time shipping by sea or by air. 

-The contact can be flat or spheric depends on customers request. 

-OEM is welcomed for this type. ROK International can turn your thinking into drawing and real micrometer. 

-Inside micrometer Range: 100-1200mm, 100-1400mm, 150-3000mm, 150-4000mm, 150-5000mm, 150-6000mm

-Low Cost, Affordable

Specification: 

Note: We reserve the right to change products and specifications at any time without notice. Images may or may not include optional equipment. Subject to ROK final confirmation

100-1000mm Tubular Inside Micrometer

Features: 

-Wide range of ID measurements by combining extension rods (pipes) and anvils with the micrometer head

-Lightweight tubular steel construction 
-Chrome frame 
-Laser engraved graduations Metric 
-Resolution: 0.01mm

-Packed with wooden box with foam for long time shipping by sea or by air. 

-The contact can be flat or spheric depends on customers request. 

-OEM is welcomed for this type. ROK International can turn your thinking into drawing and real micrometer. 

-Inside micrometer Range: 100-1200mm, 100-1400mm, 150-3000mm, 150-4000mm, 150-5000mm, 150-6000mm

-Low Cost, Affordable

Specification: 

100-2100mm Tubular Inside Micrometer Set with Extension Rods

Features: 

-Wide range of ID measurements by combining extension rods (pipes) and anvils with the micrometer head

-Lightweight tubular steel construction 
-Chrome frame 
-Laser engraved graduations Metric 
-Resolution: 
-0.01mm/Metric

-Packed with wooden box with foam for long time shipping by sea or by air. 

-The contact can be flat or spheric depends on customers request. 

-OEM is welcomed for this type. ROK International can turn your thinking into drawing and real micrometer. 

-Inside micrometer Range: 100-1200mm, 100-1400mm, 150-3000mm, 150-4000mm, 150-5000mm, 150-6000mm

-Low Cost, Affordable

Specification: 

Note: We reserve the right to change products and specifications at any time without notice. Images may or may not include optional equipment. Subject to ROK final confirmation

Digital Depth Gauge Electronic Depth Gauge With Double Hook

12 Unit Pressure Calibrator For Pressure Current Voltage Resistance

Features: 

-Pressure measuring range: -100kpa ~ 60MPa;

-It has the measurement function of pressure, current, voltage and resistance.

- Built-in 24VDC power supply for transmitter

- Built-in HART function, instead of HART handheld, Chinese and English can be switched

- Automatic temperature compensation

-  Data Storage: supports the storage of 30 verification files at the same time, each file stores up to 110 data.

- Built-in lithium battery power supply

Specification: 

 - Pressure measuring range: -100kpa ~ 60MPa; accuracy: level 0.02, level 0.05, level 0.1, level 0.2.

-  Pressure unit: there are 12 kinds of pressure units including kPa, psi, inHg, inH2O, mmHg, mmH2O,MPa, bar, mbar, atm, kg/cm2 and Pa.

Too small or too large a pressure unit may result in abnormal data display.

-  Pressure overload: When the pressure measurement value exceeds 110%FS, overpressure is displayed and an alarm is given.

-  Temperature measurement: (0~50) ℃; resolution 0.1℃; accuracy: ±0.5℃.

 Operating environment:

-  a. Ambient temperature :(-5~50)℃;

-  b. Relative humidity: ＜95% (no condensation);

-  c.Atmospheric pressure :(86 ~ 106) kPa.

-  Storage temperature :(-30 ~ 80) ℃.

-  Display: 2.8-inch color screen, 5-digit display, Chinese and English can be switched.

-  Power supply: built-in 3.7v lithium battery power supply, with 5V power adapter.

-  Auto power-off function: turn off the auto power-off function and set the auto power-off time in the system information.

-  Communication serial port configuration: baud rate: 9600; check bit: none; data bit: 8; stop bit: 1;

-  Dimension: header Φ 115 mm x 45 mm; total length: 185 mm.

-  Weight: about 0.5kg.

-  Pressure connection: M20×1.5 (can be customized according to user needs).

0.001℃ Standard Calibration Stik Thermometer PRT Sensor -80~300℃

Features: 

- The accuracy and repeatability is better than 0.05 ℃ / year, electricity float is less than 1 PPM / ℃

- Wireless Communication: real-data can be transmitted to computer through wireless communication.

- Curve display: can display the real time curve in the same time as many as 32 sets thermometer.

- Data record : can save 16,000 strip temperature measurements.

- Intelligent indication: the trend indicator shows the trend of temperature change

- zero mark: arbitrary point zero mark, volatility, deviation value visual display

- Intelligent processing: maximum, minimum and average values are directly calculated and displayed

- Unit : K, ℃, and ℉ can be switched arbitrarily

- Resistance value display: sensor resistance value and temperature value synchronous corresponding display

- Scheduled shutdown: the shutdown time can be set from 1 minute to 48 hours

- Ultra-low power consumption: No need to do battery replacement

- Sampling rate can be adjusted:  the sampling period from 1S to 2H can be customized to facilitate timing sampling

Reference Thermometers RTD Sensor  -60～180.00℃

Features: 

- The accuracy and repeatability is better than 0.05 ℃ / year, electricity float is less than 1 PPM / ℃

- Wireless Communication: real-data can be transmitted to computer through wireless communication.

- Curve display: can display the real time curve in the same time as many as 32 sets thermometer.

- Data record : can save 16,000 strip temperature measurements.

- Intelligent indication: the trend indicator shows the trend of temperature change

- zero mark: arbitrary point zero mark, volatility, deviation value visual display

- Intelligent processing: maximum, minimum and average values are directly calculated and displayed

- Unit : K, ℃, and ℉ can be switched arbitrarily

- Resistance value display: sensor resistance value and temperature value synchronous corresponding display

- Scheduled shutdown: the shutdown time can be set from 1 minute to 48 hours

- Ultra-low power consumption: No need to do battery replacement

- Sampling rate can be adjusted:  the sampling period from 1S to 2H can be customized to facilitate timing sampling

100-150mm Electronic 3 Point Bore Micrometer 3 Pin Inside Micrometer

Features:

• -Measurement can be taken closer to the bottom of the blind bore, and can be taken into a deep hole with an extension rod.
• -Patented structure for Large measuring range.
• -Highly durable with cabide-tipped contact points
• -Ratchet stop.
• -Supplied with setting rings for zero adjust.
• -Ip54 Water proof.
• Can measure deep holes using an Extension rods
• Graduation: 0.001mm, 0.005mm*,
• Versatile
• Rigid, lightweight design

Specification:

Metric

150-250mm Digital Three Point Internal Micrometerb Micrometer

Features:

• -Measurement can be taken closer to the bottom of the blind bore, and can be taken into a deep hole with an extension rod.
• -Patented structure for Large measuring range.
• -Highly durable with cabide-tipped contact points
• -Ratchet stop.
• -Supplied with setting rings for zero adjust.
• -Ip54 Water proof.
• Can measure deep holes using an Extension rods
• Graduation: 0.001mm, 0.005mm*,
• Versatile
• Rigid, lightweight design

Specification:

Metric

Ultra Thin Metal Electromagnetic Ultrasonic Thickness Gauge 0.75-1280mm A scan

Features: 

-Small size and easy to carry.
-The requirements for the workpiece surface are not high, and there is no need to polish the rough surface, which can realize non-contact measurement

-Aluminum shell. strong enough for long life span

-Type C interface

-Interchangeable probe design( can choose high temperature probe and small diameter probe with 4Mhz 42mm diameter with 57mm length. )

-It is insensitive to the coating and can realize the thickness measurement of coated workpiece.
- Without acoustic coupling agent, it can realize the thickness measurement of high-temperature workpiece and perform temperature compensation

-The instrument consists of a host and a cell phone, the host and cell phone are linked via WiFi.
- The instrument adopts the principle of electromagnetic ultrasonic, the inspection process does not need to polish the surface of the workpiece and does not need couplant
- Probe and host are integrated, probe can be replaced
- After the instrument is connected to the cell phone and tablet PC, there are
two functions of A scan and B scan

Basic Parameters

Standard package: 

Optional accessories (not in the package)