ROKTOOLS

70-100mm Mechanical 3 Pin Bore Micrometer 

Features:

-Large measurement Micrometer, inside type.

-Mechanical type

-Range: Metric 50-70mm, 70-100mm, 100-150mm, 150-200mm, 200-300mm

-Supply setting gauge for calibration (micrometer less than 100mm), Over 100mm micrometer , the setting ring is optional

-High accuracy

Metric

50-70mm Mechanical 3 Point Inside Micrometer

Features:

-Large measurement Micrometer, inside type.

-Mechanical type

-Range: Metric 50-70mm, 70-100mm, 100-150mm, 150-200mm, 200-300mm

-Supply setting gauge for calibration (micrometer less than 100mm), Over 100mm micrometer , the setting ring is optional

-High accuracy

Metric

150-2000mm Electronic Tubular ID Micrometer Set

Features: 

With digital Micrometer head: 150-175mm

Accuracy: (3 n L/50)um  (n=Number of rods, L=max measuring length)

Carbide Measuring contact

IP65 dust waterproof

ABS/INC 

MM/inch convertible

Auto Power off

with Setting standards

Specification: 

150-1000mm Digital tubular Inside Micrometer With Extension Rods

Features: 

With digital Micrometer head: 150-175mm

Accuracy: (3 n L/50)um  (n=Number of rods, L=max measuring length)

Carbide Measuring contact

IP65 dust waterproof

ABS/INC 

MM/inch convertible

Auto Power off

with Setting standards

Specification: 

150-1500mm Digital tubular Inside Micrometer Set

Features: 

With digital Micrometer head: 150-175mm

Accuracy: (3 n L/50)um  (n=Number of rods, L=max measuring length)

Carbide Measuring contact

IP65 dust waterproof

ABS/INC 

MM/inch convertible

Auto Power off

with Setting standards

Specification: 

50-70mm Digital Three Point Micrometer 3 Point Bore Mic

Picture is only for reference. It show similar range products. 

Features:

• -Measurement can be taken closer to the bottom of the blind bore, and can be taken into a deep hole with an extension rod.
• -Patented structure for Large measuring range.
• -Highly durable with cabide-tipped contact points
• -Ratchet stop.
• -Supplied with setting rings for zero adjust.
• -Ip54 Water proof.
• Can measure deep holes using an Extension rods
• Graduation: 0.001mm, 0.005mm*,
• Versatile
• Rigid, lightweight design

Specification:

Metric

Hydraulic Cylinder Jack With 50mm Stroke and Hand Pump

Features: 

-It is made of high-quality #45 steel with a plastic spraying treatment that can resist wear, shock, and deformation, ensuring a long service life.

-you can lift heavy objects more easily, reducing the risk of manual labor, improving the safety of use, and enhancing efficiency

-It can be used in narrower and lower spaces

-The powerful lifting force enables it to lift various cumbersome items quickly and firmly

Low Profile Hydraulic Cylinder Jack 5T Ultra-thin With Pump Jack Stroke 6mm

Features: 

-Compact Design with Strong Functionality---This hydraulic porta power ram features a compact size, making it suitable for use in tight spaces

-Smooth Lacquered Surface and Dust-Resistant Cover

-The jack offers easy operation. Once the pressure is released, the piston retracts automatically

Specification; 

10T Ultra-thin Hydraulic Cylinder Jack With Pump for Narrow Area

Features: 

-Compact Design with Strong Functionality---This hydraulic porta power ram features a compact size, making it suitable for use in tight spaces

-Smooth Lacquered Surface and Dust-Resistant Cover

-The jack offers easy operation. Once the pressure is released, the piston retracts automatically

Specification; 

Cross hatch adhesion tester kit cutting blade

Packing List ：

• 1, 3PCS knife blades (1mm11 teeth, 2mm11teeth , 3mm 11 teeth )
• 2, tape (19mm * 32.9m)X1
• 3, magnifying glassX1
• 4, wrenchX1
• 5, brushX1

Groove Taper Gauge Slot Feeler Tools Insert

0.4-6mm   Choose Type A

0.5-10mm Choose Type B

1-15mm  Choose Type C

Features:

    Accurately tapered throughout its entire length for quick and convenient measuement.

    Made of Stainless Steel.

    Other specification is available

Specification:

Dry Block Temperature Calibration for RTD Thermometer -20-150℃

Features:
- Small size, light weight, easy to carry;
- Various types of insertion tubes can meet the testing and calibration of sensors of different sizes and quantities. And can be customized according to the special needs of users;
- Good horizontal and vertical temperature fields;
- The insertion depth of the test is leading in the industry;
- 5-inch TFT color LCD display, resolution 800×480, full touch operation, intuitive and eye-catching;
- Chinese and English interface;
- With upper management software, you can easily read the calibration data;
- Rapid cooling, easy setting, good temperature control stability;
- The heat equalization block can be replaced;
- With load short circuit, load disconnection, sensor protection and other protection functions

Specification: 

Note: this technical indicators need to 23 /- 5 ℃ environment, valid for stable under 10 minutes after the products reach the set temperature:

- Temperature:- 20 ℃ ~ 150℃

- Temperature units: ℃ or ℉

- Temperature gauge accuracy: 0.1℃

- Display resolution: 0.01 ℃ maximum display 5 digits 11

 -Speed: 25℃ to 50℃ 6 minutes; 50℃ to 100℃ for 15 minutes;

   Speed: 25℃ to 50℃ 6 minutes; 50℃ to 100℃ for 15 minutes; 100 ℃ to 150℃ for 20minutes;

- Cooling speed: 25 ℃ to 0℃ for 15minutes. 0 ℃ to- 20 ℃ for 15 minutes;- 20 ℃to-30 ℃-22minutes;

- Temperature stability: ≤ - 0.02 ℃ / 15 minutes or less

- Inserted depth: 160mm

- The number and aperture of sensors that can be inserted: the standard configuration is 4 holes, which are less than 6, less than 8 , less than 10 and less than 12mm respectively

- Size:300mm x190mmx330mm(length x width x height)

- Weight: 13kg;

- Working voltage: 220v.ac /- 10%, optional: 220v.ac /- 10%, 45-65hz;

- Max Power: 300W

-Diameter of Heating Block: 36mm

-Hole Size:  Φ6/8/10/12 mm

-Vertical Horizontal Field:  Less than 1 ℃ within 30mm from bottom of heating block

-Temp Control Precision: 0.10%

-Temp Control Precision

2000Hz Ultrasonic Flaw Detector With Crack Height Measurement

     The instrument can be widely used in locating and sizing hidden cracks, voids, disbands, and similar discontinuities in welds, forgings, billets, axles, shafts, tanks and pressure vessels, turbines, and structural components

Features: 

-Generate PDF flaw reports directly:

-Save screenshots to USB flash drive:

-Repetitive emission frequency up to 2000Hz

-Enhanced display resolution and waveform

-Shift multi-functional button design

-Automatic calibration of probe parameters

-Unlimited video recording and playback function

-Crack Height Measure function

-Envelope, Peak Hold

-A Scan Freeze：Display freeze holds waveform and test distance data.

-B Scan display feature. Intuitively display the defect shape of the workpiece and the detection result is more intuitive.

Specification: 

Standard Package of Ultrasonic Flaw Detector 

- Master body 1 pc

- Straight probe 1 pc

- Angle probe 1 pc

- Power charger 1 pc

- BNC Probe cable 1 pc

- U Disk 1 pc

- Shoulder strap 1 pc

- Empty bottle 1 pc for Coupling agent

- User's manual 1 pc

- Test Report 1 pc

- Instrument case 1 pc

Golf Laser Rangefinder Laser Distance Meter 1000m

Features: 

-a crystal clear optical glass assembly with 7x magnification

-powerful software technology support can quickly and accurately calculate the distance even if shaking occurs.

-There are altogether 5 modes at your disposal: 1.slope compensation mode, 2.golf flag locking mode, 3.ranging mode, 4.speed measurement mode, 5.continuous scan measurement

- with rechargeable battery

Dry Block Temperature Calibrator -20℃～160℃

Features
-Easy to take; using the new material to keep its strength but with light weight still.

-Intelligent temperature control; The system can heat or cool automatically according to current environment temperature.

-6.2”color touch screen with easy reading and operation.

-Fast heating and cooling to reach the target temperature point quickly.

-Good temperature control performance; Multiple anti-interference methods and excellent control algorithms are used for temperature control.

-Intelligent reminder, sound and font color change after the temperature is stable

-Various functions, in addition to providing stable temperature quickly, there are built-in step task, constant rate heating, curve view and other functions.

-Rich personalized Settings, you can set the unit, language, display resolution, alarm upper and lower limits, screen brightness, stability conditions and other options

-With temperature curve interface, coordinate automatic adjustment, adjustable time, more intuitive view.

-Adopt double-section temperature control mode, each section can carry out accurate temperature control, to ensure that the soaking block has a good axial temperature field (onlyTECA-23021,TECA-23018).

-Multiple security, the device has multiple sensors and the corresponding alarm program. when the abnormal situation occurs, it will be timely corresponding action, and a pop-up reminder as well, which can effectively protect the safety of the tested equipment

-Strong anti-interference ability. It will still maintain a good temperature field index in the case of complex environment

-Reliable work. Can quickly carry out a wide range of temperature control, and ensure long-term reliability.

Specification (Middle temperature )

 Other information

Non-Dispersive Infrared Gas Analyzer CH4 CO2 H2s O2 CO

Features: 

5 Inch TFT LCD display

Rechargeable li-on battery

Measure the Gas concentration

Surface Roughness Tester Waviness Meter

Features: 

1. 30mm large stroke

2. ±500μm ultra-large range inductive sensor 

3. Roughness Profile, Waviness Profile, Primary Profile, Abbott Curve and Motif can be measured.

4. Using the measurement method without guide head. Only a stylus can solve R angle, deep groove, curved surface, deep hole, channel and other complex workpieces.

5. The sensor is connected to the host through a lifting frame, and the height of the sensor can be adjusted without the aid of a platform.

6. Chinese / English language selection.

7. The combination of software instrument makes it more convenient to carry.

8. The parameters are complete, including 5 measurement types and various national standards.

Specification: 

35-50mm Digital Dial bore Gauge Engine Cylinder Bore Gauge

18-35mm Digital Dial bore Gauge

Features:

*Auto record the Max/min position for reversal point search and display measurement result directly.

*Tolerance setting (optional)

* And any ring gauge can be set as standard.

* With peset function.

*Auto detect the min position adn record it as the standard parameter to eliminate the error when mound the bar. The indicator can display actual reading during measurement precess.

* Fast trace Min position with a speed of 30 times/s

10-18mm Digital Dial bore Gauge

Features:

*Auto record the Max/min position for reversal point search and display measurement result directly.

*Tolerance setting (optional)

* And any ring gauge can be set as standard.

* With peset function.

*Auto detect the min position adn record it as the standard parameter to eliminate the error when mound the bar. The indicator can display actual reading during measurement precess.

* Fast trace Min position with a speed of 30 times/s